Electroforged Gratings

Electroforged Steel Gratings are made using the electroforging process. In this process, the sqaure twisted rods (Cross Members) are fused into the main load bearing members at using a special welding machine at very high current and tonnage. The Cross Members are properly setin the Load Members such that it projects out of the grating top member by only a little more than 1 mm. This improves the slip resistance during walking. Electroforged Grating Panels are generally manufactured to 6000 mm lengths. The panels are then cut to exact Spans as per the customer requirements. The cut panels are then taken for welding of the Banding Bar. Notches and Toe Plates are added as required as per the drawing requirements. The gratings are then Hot Dip Galvanized.

The panels are then cut to exact Spans as per the customer requirements. The cut panels are then taken for welding of the Banding Bar. Notches and Toe Plates are added as required as per the drawing requirements.

advantages of using Electroforged Steel Gratings

1. High load-bearing capacity with a low dead weight.
2. High level of transparency.
3. Visually attractive
4. Easy installation and removal for maintenance / repair.
5. Hot-dip zinc surface treatment gives it a good anti-corrosion capacity, shiny surface appearance and durability for uses.
6. It is suitable for places and sites requiring ventilation and natural lighting

Advantage of Electroforged Gratings

• HOMOGENEOUS COMBINATION OF BEARING BAR AND CROSS BAR
• MASS PRODUCTION
• LESS TIME CONSUMPTION PROCESS
• ECONOMICALLY LESS COST
• QUALITY FINISHED PRODUCT
• DIMENSIONAL ACCURACY IS MORE
• ANTI SLIP PROPERTY BY USING SQUARE TWISTED BAR
• DISPATCH IS FASTER DUE TO READY STOCK OF STANDARD SIZE GRATINGS
• NO AIR GAP BETWEEN WELDED JOINTS
• WASTE IS LESS COMPARED TO MANUAL GRATINGS